ASCO電磁閥各部位厚薄不一,鑄件球化的難
度是較大的,應有相應的措施,確保鑄件質量
且要求鑄件應有有效消除內應力的措施,推廣
拋丸清砂措施。鑄件的缺陷,不允許用焊補方
。建議各建立嚴格的質量控制體系,對于
造型,大口徑電子不銹鋼采用樹脂砂造型,并
數量較大的中小口徑電子不銹鋼采用消失模法
式消除,否則應采取措施消除焊補形成的內應
力,進行更嚴格的檢驗
工作原理:
該閥采用一次開閥和二次開閥于一體的特殊結
構形式,未通電時,電磁閥呈關閉狀態。通電
作原理為只動形式,該閥特點可在零壓差下工
作,且流量比先導閥大。斷電后,磁場消失,
時,線圈產生磁場吸動鐵芯,提起閥桿導閥口
介質壓力很小時(甚至為零)動鐵芯隨閥桿將
活塞直接拉上,此時主閥口也成通路,這時動
打開,閥塞上下產生壓力差,將活塞托上。當
在彈簧和活塞自重力及壓力差的作用下,關閉
主閥口。
型號:
SCG551A001MS 230/50-60 24VDC
CG531C017MS
WPXB344-082MO,24VDC,22253
EF8551A001MS 110/DC
L23BA452BG00061
WSNF8327B122 24VDC
NF8551A321
WSNFB8551A422MO
NF8551B401MO
WSNF8551A309
NF8551B301MO
WBIS8551A301MO
WBIS8551A301
VCEFCM8551G421
WSNF8551A309
NF8551B401MO
EFG551B417MO
NF8551A322
NF8551A321
NF8551B302
WSNF8551A322
WSNF8551A422
WSNF8551A310
WBIS8551A321
WBIS8551A313
NF8551B401MO
WBIS8551A321
SCG551A017MS
EFG551H401MO 24VDC
8320G174 24VDC
SCG531CO17MS 24VDC
SCG531CO18MS 24VDC
SCG531CO01MS 24VDC
SCG551A002MS 230/50-60 4VDC
SCG531C001MS 230/50-60
SCXE238A004
SCXE238A005
SCXE238A010
SCG238E016
SCG238E017
SCG238E018
EF8551G401MO
VCEFCMG551H401MO
WSNF8551A322MO
WSNF8551A422MO
WSNF8551A322
WSNF8551A321
VCEFG551H417
VCEFCM8551G301MO
SCG531C002MS 230/50-60 24VDC
EF8551G401MO 24VDC
EFG551H417 24VDC
SCG531C018MS 8
SCG531C017MS 1
SCG531C018MS
SCG551A001MS 24VDC
SCG531C001MS 24VDC
SCG238D016
SCG238D017
SCG238D018
52100001
52100004
52100005
52100008
SCG551A001MS
SCG551A002MS
EFG551A001MS
EFG551A002MS
EF8551A001MS
EFG551H401MO
SCG531C002MS 24VDC
EF8551G401MO 24VDC
WSNF8327B002 220/AC
WSNF8327B012 220/AC
WSNF8327B212可以用WSNF8327B012代替
WSNF8327B302
SCG353A044
SCG353A047
SCG353A047
SCXE353.060
SCG551A001MS
EFG551H401MO
VCEFCMG551H301
VCEFCM8551G321
021-39526589
網址:www.hnjgt.net
地 址:上海市嘉定區嘉涌路99弄
6號樓713室